Zone 2 — Page Header (Dark Navy, Breadcrumb Pill, H1, Lead, 4-Stat Strip Answers Engineering Pre-Contact Questions)

Custom Battery Solutions for OEM Integration

Cell-to-pack manufacturing with Narada cells — one supply chain from LFP cell production to commissioned OEM system, with North American technical accountability and integration engineering support.

Voltage Range

36V – 1500V

BMS Protocols

CAN · Modbus · CANopen

PCS Platforms Tested

[N] platforms

Evaluation Timeline

[X] weeks to NDA + units

These 4 stats answer the 4 questions an OEM engineering team asks before they open a conversation. Answering them in the header removes the biggest pre-contact friction.

Zone 3 — Sticky-Scroll Section: Left Panel = Dark Navy "What We Build for OEM Partners" (Sticky), Right = 6 Scrolling Numbered Sticky Cards

OEM Capabilities

What we build for OEM partners

We are not a catalog supplier. MPINarada OEM relationships involve cell specification review, integration engineering support, certification documentation, and production quality documentation per batch.

We are the right partner if you are building a product line that requires consistent cell performance over a multi-year production run.

Sticky left anchors the section heading while cards scroll — prevents the user losing context during a long scroll.

Sticky Card 1 — Cell Chemistry Options

01 / Cell Chemistry Options

LFP and VRLA chemistry selection

Prismatic LFP for high cycle life and thermal stability. Cylindrical LFP for high energy density. VRLA AGM and VRLA Gel for drop-in VRLA replacements. Chemistry selection reviewed against your application requirements — not defaults.

View cell specifications →

Sticky Card 2 — Pack Configurations

02 / Pack Configurations

Series / parallel cell configurations, custom voltage

36V to 1500V system voltage via series configuration. Rack-mount, module, and cabinet form factors. Custom physical dimensions available for volume production runs. Design freeze provisions available for production-volume product lines — physical specification changes require advance notice per agreement.

Download integration spec →

Sticky Card 3 — BMS Integration

03 / BMS Integration

CAN 2.0B, Modbus TCP/RTU, CANopen

Pre-validated BMS register maps and CAN message definitions for each supported protocol. Alarm / fault code reference documentation included. Custom protocol integration available for qualified OEM partners. See the BMS/PCS compatibility matrix below for pre-tested platform configurations.

View compatibility matrix →

Sticky Card 4 — Thermal Management

04 / Thermal Management

Active cooling, passive cooling, and interface specs

Passive thermal management standard. Active cooling interface documentation for high-power-density applications. Thermal derating curves provided for integration into your system thermal model. Temperature coefficient data available under NDA for electrochemical characterization.

Sticky Card 5 — Certifications

05 / Certifications

UL, IEC, CE — OEM cert transfer documentation

UL 1973 and IEC 62619 cell-level documentation integrates into your system-level certification process. We coordinate with your certification body on documentation submissions. Certification scope document details what transfers to OEM product vs. what requires co-testing — available ungated in the docs section below.

View cert specs →

Sticky Card 6 — NDA / IP Protection

06 / NDA / IP Protection

Cell-level data, factory docs, and supply chain traceability

Cell-level performance data beyond the public datasheet — electrochemical characterization curves, temperature coefficient data, life-test data at non-standard conditions — available under standard NDA to qualified partners. Factory audit access and production traceability documentation available to active OEM partners. No named competitor data is shared.

Start NDA process via OEM inquiry →

Zone 4 — Partnership Framing: Who This Is For / Isn't (Honest Scope Statement, Not a Catalog Supplier)

OEM Partnership

What the OEM relationship is — and what it isn't

We are not a catalog supplier. OEM relationships with MPINarada involve cell specification review, integration engineering support, certification documentation, and production quality documentation per batch.

We are not the right partner for one-time spot buys. We are the right partner if you are building a product line that requires consistent cell performance over a multi-year production run.

Narada Power Source (SH:600884) is the cell manufacturing partner. Supply chain documentation, factory audit access, and production traceability documentation are available to qualified OEM partners.

Honest scoping saves both sides from a conversation that won't convert. "Not for spot buys" is not a lost lead — it's a qualified lead filter.

Who this is for

UPS system manufacturers integrating LFP battery modules
Telecom infrastructure OEMs replacing VRLA in existing platforms
Energy storage system integrators building BESS products
Industrial equipment manufacturers adding battery backup

Who this is not for

One-time or spot purchase inquiries (use the quote form)
Consumer product manufacturers (minimum volume thresholds apply)
Resellers without integration engineering capability

Zone 5 — What MPINarada Provides to OEM Partners (Specific Deliverables, Not Marketing List)

Partnership Deliverables

What MPINarada provides to OEM partners

Narada Cell Supply Access

Direct sourcing from a top-5 global LFP cell producer, with supply chain documentation: factory audit reports, cell traceability records, batch quality certificates, and Narada manufacturing certifications.

Integration Engineering Support

A North American applications engineer assigned to your integration project — not a ticket queue. Response commitment for integration questions is documented in the partnership agreement.

Certification Documentation

UL 1973 and IEC 62619 cell-level documentation that integrates into your system-level certification process. We coordinate with your certification body on documentation submissions.

Batch Traceability

Production quality documentation per manufacturing batch: inspection records, electrochemical data, and out-of-spec handling procedures. Available for each delivery for your QMS records.

NDA-Protected Technical Data

Cell-level performance data beyond the public datasheet — electrochemical characterization curves, temperature coefficient data, and life-test data at non-standard conditions. Available under standard NDA to qualified partners.

Production Consistency Commitment

Multi-year supply agreements with specification stability guarantees. Design freeze provisions available for production-volume product lines — cell chemistry and physical specification changes require advance notice per agreement terms.

Zone 6 — Cell Specs Dark Grid (Bordered Grid on Dark Navy — LFP Prismatic, LFP Cylindrical, VRLA AGM, VRLA Gel, Custom)

Cell Chemistry & Format Options

Available cell formats for OEM integration

▣

Prismatic LFP

High cycle life · thermal stability

◉

Cylindrical LFP

High energy density · modular

⊟

VRLA AGM

Drop-in replacement · spill-proof

⊞

VRLA Gel

Deep cycle · high temp tolerance

⬡

LFP Pouch

Thin profile · high gravimetric density

⊕

Rack Module (48V)

Pre-configured · data center ready

⊜

Cabinet Pack (480V+)

BESS · grid storage · UPS backend

+

Custom Format

Volume production · spec review required

Each grid item links to the docs section or OEM inquiry — not a dead-end cell page.

Zone 7 — BMS/PCS Compatibility Matrix (Primary Technical Differentiator — No Competitor Publishes This)

Integration Reference

BMS / PCS Compatibility Matrix

Pre-tested integration configurations. Engineers at UPS and systems OEM companies bookmark this section. No competitor publishes a validated compatibility matrix.

Platform / UPS Model	Manufacturer	BMS Protocol	Integration Status	Configuration Notes
Eaton 9PX	Eaton	Modbus TCP	✔ Pre-Tested	Float voltage adjustment required: 54.0V. BMS register map rev. 2.3.
APC SURT / Smart-UPS	Schneider Electric	Modbus RTU	✔ Pre-Tested	Battery type selection: custom. Float voltage 53.6V. Temperature compensation disabled.
Vertiv Liebert EXM2	Vertiv	CAN 2.0B	✔ Pre-Tested	Full CAN bus integration. SOC, SOH, cell temp telemetry. Contact engineering for register map.
GE SG-Series	GE Power / ABB	Modbus TCP	✔ Pre-Tested	Dual-string configuration tested. Requires BMS firmware v2.1+.
ABB PowerValue 11T	ABB	Modbus RTU / CANopen	⟳ In Testing	CANopen testing underway — Q3 2025 completion. Modbus RTU tested and confirmed.
SMA Sunny Island	SMA	CAN bus	✔ Pre-Tested	BESS / C&I application. SMA BMS profile available. Contact engineering for BMS config file.
Victron MultiPlus-II	Victron Energy	CAN bus (VE.Can)	✔ Pre-Tested	VE.Can profile: BYD B-Box (compatible). DVCC enabled. SOC threshold configurable.
[Your UPS platform]	—	—	Request Testing	Not in current test matrix. Submit OEM inquiry to initiate compatibility evaluation.

Last updated: March 2025. Compatibility confirmed at tested firmware versions — contact engineering before upgrading UPS firmware on integrated systems. Additional platform testing available on request.

This table is the highest-value content on the OEM page. Engineers at OEM companies will share this URL internally. It directly answers "does it work with my platform" before they have to ask.

Zone 8 — Integration Spec Downloads (Ungated — Documentation IS the Product of This Page)

Technical Documentation

Integration specifications and reference documents

OEM integration documentation is available without a gate. Procurement and engineering documentation requiring NDA — request via the OEM inquiry form below.

📐

OEM Integration Specification

Physical dimensions, mounting pattern, terminal type, connector pinout, cooling interface, and thermal management requirements.

Download Integration Spec

PDF · 3.2 MB · Rev. 1.4 · Mar 2025

No form required

🔌

BMS Communication Protocol Reference

Full Modbus register map, CAN message definitions, CANopen object dictionary, and alarm/fault code reference.

Download BMS Reference

PDF · 4.8 MB · Rev. 2.3 · Mar 2025

No form required

🏆

Certification Scope Document

What certifications transfer to OEM product, what co-testing is required, and which markets are covered by existing certs.

Download Cert Scope

PDF · 1.1 MB · Rev. 1.0 · Jan 2025

No form required

🔒

Cell-Level Datasheet (NDA)

Electrochemical characterization, capacity fade curves, and production QC methodology. Available to qualified OEM partners under NDA.

Request via OEM Inquiry

Available under signed NDA

Qualification review required

🏭

Factory Quality Documentation

Manufacturing process overview, incoming inspection procedures, batch traceability system, and out-of-spec handling protocol.

Request via OEM Inquiry

Available to active OEM partners

📊

Sample Life Test Data

Representative cycle life test data at multiple C-rates and temperatures, in standard format for engineering review.

Request via OEM Inquiry

Available under NDA

Ungated documentation is the correct call for OEM engineering audiences. Engineers do not submit forms to read specs — they leave and find a supplier who publishes them.

Zone 9 — OEM Partner Spotlight (cta-card Dark Navy, Radial Gradient Overlays, Results Bullets, Link-Arrow)

OEM Integration Reference

OEM partner spotlight

Active OEM Integration

UPS System Manufacturer — 48V Rack-Mounted Battery Platform

North American UPS OEM replaced VRLA battery modules in their 48V rack UPS product line with MPINarada NESP Rack modules. Integration required BMS Modbus TCP configuration, float voltage adjustment, and UPS firmware update for LFP charging profile.

Cycle life specification increased from 500 cycles (VRLA) to 5,000 cycles at rated conditions
Product now carries a 10-year battery system warranty
UL 1973 co-listing documentation provided for certification submission
Integration timeline: 8 weeks from initial inquiry to certified product

Start your OEM partnership →

Aggregate stats across active OEM integrations: [N] OEM products in production using MPINarada battery modules across [X] application categories in [Y] markets.

If no named case study is approved, use aggregate metrics — as long as the numbers are real and verifiable.

Zone 10 — Certifications (bg-light, Cert Badge Grid + Spec Table for OEM Transfer Documentation)

Certification Coverage

Certifications and compliance documentation

UL 1973

Stationary battery systems for stationary applications

UL 9540

Energy storage systems and equipment

IEC 62619

Secondary lithium cells and batteries — safety requirements

ISO 9001

Quality management systems — manufacturing process

OEM certification transfer reference

Certification	Scope	Transfers to OEM?	OEM Action Required	Coverage Markets
UL 1973	Cell and module level	Partial transfer	System-level listing required for complete transfer	North America
UL 9540	System level (complete ESS)	Requires new listing	OEM applies for own UL 9540 using MPI cell documentation	North America
IEC 62619	Cell level	Full transfer	Reference in OEM product documentation	International
ISO 9001	Manufacturing process	Supply chain documentation	Include in OEM supply chain audit records	International
CE / EN standards	European market entry	Contact engineering	Available for qualified partners — inquiry required	Europe

The cert transfer table answers the question every OEM engineering team has: "what do we get and what do we still have to do ourselves?" Answering this in prose takes longer and is less credible than a table.

Zone 11 — OEM Inquiry Form (Different from Standard Quote Form — Application, Protocol, Volume, Current Supplier Context)

Start the Conversation

Submit OEM partnership inquiry

OEM partnership inquiries are reviewed by our engineering team, not a sales development rep. We respond within two business days with a specific point of contact for your application.

First Name *

Last Name *

Work Email *

Company Name *

Job Title *

BMS Protocol Needed *

What are you building? *

Free text — OEM applications are too varied for a dropdown.

Estimated Annual Volume *

Volume estimate informs whether MPINarada's manufacturing capacity and customization support is a fit — not a sales filter.

Target certifications / markets

UL (North America) CE (Europe) IEC NEBS / Telcordia Other

Current cell supplier (Optional — helps us understand your context)

What are you trying to solve? (Optional)

OEM partnership inquiries are reviewed by our engineering team, not a sales development rep. We will respond within two business days with a specific point of contact for your application.

OEM Evaluation Process

After inquiry submission, here's what the evaluation process looks like:

1

Engineering review (1–2 days)

Team reviews application fit, volume, and compatibility with current product line.

2

Engineering call (30–60 min)

Application requirements, integration scope, timeline, and protocol configuration review.

3

NDA + evaluation units

Evaluation hardware shipped within [X] weeks of NDA execution. Full integration docs included.

4

Partnership agreement

Volume pricing, specification stability commitment, support terms, and supply agreement.

Why OEM teams choose MPINarada

5,000+

Cycle life at rated conditions — 10× VRLA

8 wk

Typical integration to certified product

[N] OEMs

Active production integrations in [X] markets

Zone 12 — Full-Bleed CTA: "Start Your OEM Partnership" (Dark Navy, Centered, Orange Gradient Radial)

Ready to integrate?

Start your OEM partnership

Cell-to-pack manufacturing. North American engineering accountability. Multi-year supply stability with specification freeze provisions.

Submit OEM Inquiry Download Integration Guide

CTA anchors back to the two highest-intent actions on the page — no navigation away. Inquiry = commercial intent. Docs = evaluation intent. Both are valid at this stage.

Footer — Large Wordmark Style